Tile Calculator
A Tile Calculator tells you how many tiles to buy for a room. Enter the room length and width, pick a tile size, set the grout joint and waste percentage, and it gives you the tiles to buy, the boxes needed, and the estimated cost, with the grout joint counted in every tile.

How the Tile Calculator works
The math is simple, but the grout joint is the part most people forget. Each tile covers slightly less floor than its printed size, because a thin grout line sits between every tile. The calculator adds the joint width to both sides of the tile before working out how much floor one tile covers.
First it works out the room area by multiplying length by width. Then it works out one tile footprint: tile width plus joint, times tile length plus joint, divided by 144 to turn square inches into square feet. Dividing the room area by that footprint gives the raw tile count, always rounded up, since you cannot buy part of a tile. Finally it adds the waste allowance: 10% suits a square room with large tiles, while 15% or 20% is safer for diagonal layouts, small tiles, or rooms with many corners. If you know how many tiles come in a box, the calculator rounds the total up to whole boxes and shows your spare tiles.
How to use the Tile Calculator
- Measure the room length and width in feet, wall to wall, and enter both numbers.
- Pick your tile size from the list, or choose Custom and enter the tile width and length in inches.
- Set the grout joint width. A 1/8 inch joint is standard for most floor tiles.
- Choose a waste allowance: 10% for a simple room, 15% for most rooms, 20% for diagonal patterns.
- Enter tiles per box and price per box if you know them, then click “Calculate tiles” and check the results before you order.
Tile Calculator examples
The table below shows verified results from this Tile Calculator, all with a 1/8 inch grout joint. The 15 x 12 ft example needs 13 boxes at 8 tiles per box, leaving 1 spare tile, at $324.87 when a box costs $24.99. The 20 x 15 ft example needs exactly 15 boxes at 6 tiles per box, with no spare tiles, at $480.00 when a box costs $32.00.
| Room | Tile size | Waste | Room area | Tiles to buy |
|---|---|---|---|---|
| 12 x 10 ft | 12 x 12 in | 10% | 120 sq ft | 130 tiles |
| 15 x 12 ft | 12 x 24 in | 15% | 180 sq ft | 103 tiles |
| 10 x 8 ft | 18 x 18 in | 10% | 80 sq ft | 39 tiles |
| 20 x 15 ft | 24 x 24 in | 20% | 300 sq ft | 90 tiles |
| 8 x 5 ft | 3 x 6 in subway | 15% | 40 sq ft | 347 tiles |
The table below shows how many tiles cover 100 square feet before waste, using a 1/8 inch grout joint.
| Tile size | Tiles per 100 sq ft |
|---|---|
| 3 x 6 in subway | 753 |
| 6 x 6 in | 384 |
| 12 x 12 in | 98 |
| 12 x 24 in | 50 |
| 18 x 18 in | 44 |
| 24 x 24 in | 25 |
Choosing the right waste allowance for tiles
Waste covers the tiles you cut at walls, the pieces that chip, and the odd tile that arrives cracked. A square room with 12 x 12 in tiles and straight cuts wastes the least, so 10% is usually enough. Angled walls, a diagonal layout, or a herringbone pattern can waste 20% or more, because every angled cut throws away part of a tile.
Always keep the spare tiles. Tiles from a later batch can differ in shade, so spares from the same batch are the cheapest insurance against a cracked tile years later. If your project also involves a new base, working out how much concrete a slab needs is a useful companion estimate, and estimating paint coverage for the walls helps you finish the room in one trip to the store.
Frequently asked questions about the Tile Calculator
How many tiles do I need for a 12 x 12 room?
A 12 x 12 ft room is 144 sq ft. With 12 x 12 in tiles, a 1/8 inch grout joint and 10% waste, you need about 156 tiles. Use the calculator above with your exact tile size and joint for a precise number.
What waste percentage should I add for tiles?
Add 10% for a simple square room with straight cuts, 15% for most rooms, and 20% for diagonal layouts, herringbone patterns, or rooms with many corners. Small tiles and patterned layouts waste more than large tiles in an open square room.
Do I count the grout joint when measuring tiles?
Yes. The joint adds space between every tile, so each tile covers slightly less floor than its printed size. A 12 x 12 in tile with a 1/8 inch joint covers about 1.02 sq ft. This calculator adds the joint automatically.
How many boxes of tile do I need?
Divide the tiles to buy by the tiles per box and round up. For example, 103 tiles at 8 tiles per box means 13 boxes, giving you 104 tiles and 1 spare. Enter the tiles per box above and the calculator does this for you.
How do I calculate tiles for a wall or backsplash?
Measure the wall height and width in feet and enter them as the room length and width. An 8 x 5 ft wall with 3 x 6 in tiles and 15% waste needs 347 tiles. Add extra waste for outlets or fixtures to cut around.
Should I buy extra tiles beyond the waste allowance?
Keep a few spare tiles from the same batch for future repairs, since later batches can differ in shade. One extra box is cheap insurance if you have storage space. Tiles are heavy, so check the return policy before over-ordering.
Learn More
Plan the rest of your project with these related calculators:
- Concrete Calculator
- Mulch Calculator
- Gravel Calculator
- Paint Coverage Calculator
- Topsoil Calculator
- Sod Calculator
- River Rock Calculator
Tile Calculator in other languages
Use the Tile Calculator in your language: